Grand Harmony Loudspeaker

Grand Harmony Loudspeaker

  • Design:4.5-way vented-box
  • Frequency Response:30Hz-40kHz
  • Sensitivity (2.83V/1m):88dB
  • Impedance:4 ohms(minimum 3.2 ohms)
  • Power Requirement:50-350W recommended
  • Tweeter-1:Model:G2Si. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT):60mm×8.5mm×0.01mm. High power handling, high output, shielded design,
    easily field-replaceable for the ribbon.
  • Tweeter-2:Model:AST2560. Aero striction tweeter, the size of diaphragm (WL):25mm ×60mm, easily field-replaceable for the diaphragm.
  • Tweeter-3(Rear Firing Tweeter):Model:G2Si. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT):60mm×8.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
  • Midrange:Model:AC165/DC50SCTi-2, 1×165mm (6.5″). Aluminum frame, the surface of carbon fiber sandwich cone with nanometer aero metal material plated, 50mm (2″) copper clad aluminum voice coil with flat wire,the special magnet system with Faraday ring and demodulation coil, 120mm×20mm and 80mm×15mm Y30 Ferrite magnet.
  • Woofer:Model:AC200/50C2CTi, 2×200mm (8″). Aluminum frame, the surface of carbon fiber sandwich cone with nanometer aero metal material plated, 50mm (2″) copper clad aluminum voice coil with flat wire,the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y30 Ferrite magnet.
  • Crossover Frequency:200Hz, 1.8kHz, 7kHz and 9kHz.
  • Crossover’s Attenuation Slope:Woofer -12dB,Midwoofer -12dB,Tweeter:T1 -12dB, T2 -12dB,T3(Rear firing tweeter) -12dB.
  • Crossover Components:M-cap MKP capacitors are used for crossover of tweeter and  midrange, and Aurum Cantus MKP capacitors are used for crossover of woofer, nonpolarity electrolytic capacitors are used for emendation circuit of woofer. Also, high purified OFC inductors and the metal oxide film resistors with military industrial standard.
  • Connective Cable:Teflon insulated OCC cable
  • Damping Material:High quality wool, the polyester fiber and the PU foam.
  • Connections:4 pcs 18mm gold-plated copper connector, Bi-wiring
  • Cabinet Material:High quality MDF
  • FinishThe standard finish is Sapele pomele PE high gloss paint. Furthermore, there are also Rosewood PE high gloss paint, Cherry PE high gloss paint and black piano paint for options.
  • Dimensions (HWD)1190mm×357mm×492mm (46.85″×14.06″×19.37″).
  • Net Weight:61kgs/pc(134.47lb/pc)